Manufactured on an automated assembly line rather than being DIY Made as per kit set manual. Quality Control Tested.
Includes a 9-volt battery pack (Battery required) test probes and an English user manual. This oscilloscope is fully portable.
Popular for use in turning amplifiers.
Maximum input voltage: 50Vpk or 100vpp with clip probe. Do Not Overload.
Adopt ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen.
Can be used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Auto/Normal/Single trigger modes, you can capture any moment waveform.
Available rising or falling edge trigger.
Observable previous waveform before trigger (negative delay).
Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: Will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out a soldering error.
TFT controller recognition function.
Maximum Real-time Sampling Rate: 1MSa/s
Analog Bandwidth: 0-200KHz
Sensitivity Range: 5mV/div-20mV/idv
Maximum Input Voltage: 50V pk (1X probe)
Input Impedance: 1M ohms/20pF
Accuracy: 12 Bits Record Length: 1024 points
Coupling Modes: DC / AC / GND Time
Base Range: 500s/Div - 10us / Div
Trigger Modes: Auto, Normal, and Single Trigger Position
Center of Buffer Supply Voltage: DC 9V(8-10V) Current
Online Volts to Watts calculator:
Online Watts to Volts calculator:
Kiwi Trader, This item is located in New Zealand and ready for immedate dispatch.
Selling since 2018
Your item will be sent with NZ Post and delivery times are 1-3 Business days on average. If you order on Friday through Sunday, your order will be dispatched first thing Monday morning. Postage includes a tracking number that will be emailed to you post purchase.