Brake Fluid Tester

Brake Fluid Tester
 
Automatic moisture detection, LED lights to indicate the percentage of moisture content in brake fluid.
 
Moisture in the brake fluid can lead to brakes overheating under heavy breaking and can causes corrosion in brake lines over time which can lead to a loss of break pressure and end in brake failure if not checked out.
 
Tests DOT 3, DOT4, DOT 5 brake fluids.
 
Selling since 2018
 
Instructions:
This brake fluid moisture detection tool works based on a change in conductivity to determine the moisture level in the brake fluid.
 
It indicates the extent of moisture contained in the fluid by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.
 
Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.
 
The green LED light= Water content in the brake fluid H2O <1.5%, brake fluid qualified.
 
2 The yellow LED light = Brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later.
 
The red LED light= Water content in the brake fluid H2O> 3% + Recommended not to continue to use the vehicle. The brake fluid needs to be replaced asap.
 
Requires X1 AAA battery (not included)
 
Kiwi Trader, This item is located in New Zealand and ready for immedate dispatch.
 
Selling since 2018